High Altitude Climbing Truck 12m Hydraulic Scissor Lift Platform

Platform Lift Clipping Fork Type Mobile Small Hydraulic Lifting Platform High-Altitude Climbing Truck

Standard Features:

With CE certification,meet EN 1570 ANSI/ASME safety standards.

Convenient electric and hydraulic system and scissor design for easy lifting,lowering.

AC 110/220/380/460V,50/60Hz power supply,low-tention (24V) control box.

Applicable to various industries,expecially in warehousing,logistics,manufacturing industies.

Custom design and specs available.

FAQ

1. Loading capacity----200KG, 250KG OR 300KG......?

2. The size of the table-----?

3. Working height------3m, 6m, 10m, 12m......?

4. Driving mode ----Diesel engine or Hydraulic or Electric or Battery ?

5. Fixed type (without wheel) or Trolley (with wheel) ?

1. The lifting platform has been inspected and debugged at the factory before delivery. All the technical indexes have reached the design requirements. When using, the lifting platform only needs to be connected with the power supply, and the hydraulic system and electrical system need not to be adjusted.

2. The platform should be carefully checked before use of hydraulic, electrical systems, no leakage or naked leakage before use.

3. Lifting platform in use, the four legs should be firmly supported on a solid ground (with the wheel to leave the ground shall prevail) if necessary, the use of sleepers.

4. Lifting platform empty run 1-3 times before loading operation.

5. load center of gravity should be as far as possible in the center of the table.

6. Guard railings at both ends of the movable door should be locked after the lock operation.