Single Girder 7.5m Electric Overhead Crane Lifting Equipment

Electric Single Girder Overhead Bridge Crane Lifting Equipment

Technical characteristics:

The limiting size is the lowest between the top of crab and the track of trolley, that is to say, it reduces 20%-30% compared with traditional products, which can reduce the capacity of workshop 20% efficiency. It has hard-tooth reducer, imported wire-rope, and trinity drive. It is equipped with such protecting devices as alarm device to overloading, obliquely hanging second protecting equipment preventing hook clashing the top, protecting the current lacking of any phrase etc. The operating board (handle) adopts 12v safe voltage to fulfill multifunction of protection to overheadhoist. The electric controlling can be used more than 2 million times when the voltage is 380v+5~-10%.

Points to attention:

1. Users should lock the crane in time, when the crane stops operating on operating spot.

2. There is no electric wire above the total switch of the crane. Strictly forbid to use in such dangerous operating as easily combustible, explosive, corrosive, overloading, dust, etc.

Single girder, welded box beams, the camber line is according to national standard.

High safety, high steel degree.

Adopts high quality carbon steel, Q235B or Q345B.

The main weld is by submerged arc welding automatic welding, nondestructive flaw detection.

The end truck adopts 10.9 high strength bolt connection.

The crane traveling mechanism adopts separated driving, and it can use trinity drive too, safe and reliable.

End beam equipped with buffer block, orbital cleaning device.

FAQ
1. What is an overhead crane inspection?
Periodic (Annual) Overhead Crane & Hoist Inspection. The Periodic (Annual) Overhead Crane and Hoist Inspection is a detailed visual and operational inspection. Individual components are examined to determine their condition. The Periodic Inspection is performed Annually, Semi-Annually and perhaps even Quarterly based on severity of service.

2. Why do you need an overhead crane?
Moving bulky loads on floors or through aisles requires a lot of time and can result in injuries. However, overhead cranes play a key role in this because they easily allow warehouse owners in lifting, lowering and moving loads horizontally.

3. What is the role of the grab bridge bucket crane?
Usually, the grab bucket crane is located at the top of the garbage storing pit and is mainly used for the operation of feeding, conveying, mixing, fetching, and weighing of garbage. The garbage grab crane manufactured by the crane factory can implement lifting and convey strictly to ensure normal work of garbage cremation power point.